-40%
VTG Stanley Mitre Box No 358 Frame Type No 3 Sweetheart Logo
$ 25.34
- Description
- Size Guide
Description
Patent dates 10-5-09 / 1-2-12Frame is good, frame board is used and will need to be replaced at sometime
The saw guide stop and Bolt on right rear has been sawed on, it still tightens picture no. 4
Identification plate for saw, appears to have a gray paint splatter on it, see picture 8
Length stop stand has a patent date of 10-31-16
Made for a 28" X 5", will accommodate a saw with a 5" depth in a 20" or 26" long saw
Some T base clamp screws heads are stripped, they are set and adjusted for the uprights picture No 12
Saw guide Tie bar is straight, not sure if the 1st screw for tie bar is original.
There is a compression spring on the front upright. On the rear upright there is not one, on a parts list I found on the Valley Woodworker website it does not show a compression spring for the rear upright.
Some paint flecks, paint loss on the unit. On the bottom of the frame board one small screw does not stay in the frame board, the wood around the wood screw will not hold it in.
Uprights and saw guide cylinders will be removed for shipping
Any questions, please ask.